Coastal Electronic UFRD 360-2 Lockpick Manuel - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Coastal Electronic UFRD 360-2 Lockpick. Coastal Electronic UFRD 360-2 Lockpick 15 pages.

Imprimer la page

9. **IMPORTANT **

conductive tool, touch the two circuit board traces together for 7 seconds. The radio must be discharged

to turn it fully off before installing and replacing the ribbon cable.

can result in permanent radio damage.

10. After discharging the circuit board, locate the Lockpick harness with attached ribbon cable. Position the

cable with the shiny contacts facing down and the insulated side visible in the top.

Locate the grounding points pictured below. With a small screwdriver or other

Failure to discharge the circuit board