Acer AC901 Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Acer AC901. Acer AC901 12 pages. Acer ac901: users manual

Imprimer la page

INSTALL THE

MONITOR

•

To connect the tilt/swivel base to the monitor, align

hooks with the sockets on bottom side of the

monitor, and gently push the base towards the front

of the monitor.

•

The 15-pin D-shell signal connector on the signal

cable will connect easily to the video adapter

output on your personal computer. Lock both

screws on the connector to ensure a firm

connection.

•

Turn the PC power switch ON. Then turn the

monitor power switch ON, by pressing the switch

inward. The green power indicator will light up.

•

Allow about 30 seconds for the CRT tube to warm

up. Data will be displayed on the screen.

•

If your display fails to function properly, please

first refer to the section "Troubleshooting" in this

manual.

POWER CORD

•

Check first to make sure that the power cord you

use is the correct type required for your area.

•

Type NO: C1996NSL

This monitor has a universal power supply that

allows operation in either 100/120V AC or 200/

240V AC voltage area. No user-adjustment is re-

quired.

•

First connect the power cord into your monitor's

power input socket, and then plug the other end

into a 3-pin AC outlet. The power cord may be

connected to either a wall socket or the power out-

put socket on your PC, depending on the type of

power cord supplied with your monitor.

•

For units to be used at 120V AC:

Use a UL Listed Cord Set consisting of a min.

No. 18 AWG, Type SVT or SJT three-conductor

a maximum of 10 ft. in length and a parallel blade,

grounding type attachment plug rated 10A, 125V.

•

For units to be used at 240V AC (domestic use):

Use a UL Listed Cord Set consisting of a min. No.

18 AWG, Type SVT or SJT three-conductor cord

a maximum of 10 ft. in length and a tandem blade,

grounding type attachment plug rated 10A, 250V.

•

Type NO: C1996PNST

For units to be used at 220/240V AC (outside of

U.S.):

Use a Cord Set consisting of a min. 0.75mm

Type H05VV-F cord and grounding type attach-

ment plug rated 16A, 250V. The cord set should

have the appropriate safety approvals for the coun-

try in which the equipment will be installed and

marked HAR.

English

E - 3

,3G,