Canon 3302B002 Manuel de configuration du réseau - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de configuration du réseau pour {nom_de_la_catégorie} Canon 3302B002. Canon 3302B002 9 pages. Canon pixma ix7000: network guide

Imprimer la page

Changing the Port Name

Note
By changing the port name, you can change the name of the printer.
•
When you set up an additional computer to use the printer whose port name you changed, the
printer is displayed with the changed port name. When two or more computers are set up, the
changed name is displayed.
When multiple computers or printers are present, this can be used to change the name to one that
is easy to remember.
Action
The port name can be changed by the following procedure.
1
Click Set Port Name in the Setup Completion
dialog box.
•
The Set Port Name dialog box is displayed.
2
Change the port name.
•
Port names should consist of alphanumeric characters and be no longer than 21 characters,
excluding the prefix.
•
The port name includes the fixed prefix "CNBJNP_", which you do not need to enter.

Restoring the Printer's Default LAN Setting to Perform Setup Again

Action
Use the RESUME/CANCEL button on the printer to restore the default state.
1
Disconnect the LAN cable.
2
Hold down the RESUME/CANCEL
button (A) on the printer until
the POWER lamp (B) flashes 10
times, then release the RESUME/
CANCEL button after the tenth
flash.
The LAN setting of the printer is now restored to the default state.
•
Perform setup again by following the procedures in "Wired LAN Connection" (Windows: P.23,
Macintosh: P.32) and onward in the printed manual: Getting Started.
<Default State>
TCP/IP setting
Obtain an IP address automatically

Printing the Printer's Network Setting Information

Action
Use the RESUME/CANCEL button on the printer to print the network setting information.
1
Hold down the RESUME/CANCEL
button (A) on the printer until
the POWER lamp (B) flashes 6
times, then release the RESUME/
CANCEL button after the sixth
flash.
Printing will start.
B
A
B
A