Canon 3807B007 Manuel de base - Page 16
Parcourez en ligne ou téléchargez le pdf Manuel de base pour {nom_de_la_catégorie} Canon 3807B007. Canon 3807B007 48 pages. Large-format printers
Également pour Canon 3807B007 : Manuel de configuration (12 pages), Manuel de base (20 pages)
Imprimer la page
Loading Rolls in the Printer
Load rolls in the printer as follows.
•
Always load rolls when the printer is on. If the printer is off when you load a roll, the paper may not be advanced
correctly when you turn the printer on.
•
Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide . If these
areas are dirty, we recommend cleaning them in advance. (→
1
Press the Load button.
2
Press ▲ or ▼ to select Roll Paper , and then press the
OK button.
•
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes , and then press the OK button. Remove the paper and go to the next step.
3
Open the Roll Feed Unit Cover .
4
Holding the Roll Holder fl ange (a), load the Roll Holder
shaft into the guide grooves (b) on both sides of the Roll
Holder Slot . At this time, load the shaft so that the color
of the Roll Holder shaft (c) matches the color of the guide
groove.
•
Do not force the Roll Holder into the printer with the right and left ends reversed. This may damage the
printer and Roll Holder .
•
Do not release the fl anges until the holder is loaded in the Roll Holder Slot .
•
Be careful not to pinch your fi ngers between the guide grooves (b) and the Roll Holder shaft (c) when
loading rolls.
•
If it is diffi cult to load rolls from the front of the printer, load rolls from the back of the printer.
, If Paper is Soiled)
c
b
16
c
b
a