Aktakom ATK-2021B Manuel de l'utilisateur - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aktakom ATK-2021B. Aktakom ATK-2021B 17 pages. Clamp meter
Imprimer la page
3.1.2. AC Current
a. Set the rotary switch at 40A or 200A and move the sliding switch to
AC.
b. Press the trigger to open the jaw and fully enclose the conductor to
be measured. No air gap is allowed between the two half jaws.
c. Read the measured value from the LCD display.
3.2. DC/AC Voltage Measurements
WARNING : Maximum input for DC V is 600, and for AC V is 600. Do not attempt
to take any voltage measurement that exceeds the limits. Exceeding the limits
could cause electric shock and damage to the clamp meter.
3.2.1.DC Voltage
a. Set the rotary switch at V DC.
b. Insert the test leads into the input jack.
c. Connect the test prods of the test leads in PARALLEL to the circuit to be
measured.
d. Read the measured value from the LCD display.
3.2.2. AC Voltage
a. Set the rotary switch at V AC.
7
www.tmatlantic.com