Aktakom AM-1016 Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aktakom AM-1016. Aktakom AM-1016 12 pages. Network multimeter

Imprimer la page

Overload Protection: F 200Ma/250V fuse for 200μA to 200mA ranges

Frequency Range: 40Hz to 400Hz (for AC)

Response: Average, Calibrated in rms of sine wave

4.4 RESISTANCE

Range

Resolution

200Ω

0.1Ω

2KΩ

1Ω

20KΩ

10Ω

200KΩ

100Ω

2MΩ

1KΩ

20MΩ

10KΩ

200MΩ

100KΩ

Maximum Open Circuit Voltage: 700mV (3V for200MΩ range).

Note: On 200MQ range, if short input, display will read 1 MQ, this 1 MQ should be subtracted from

measurement results.

Overload Protection: 250V dc or 250V ac rms

4.5 DIODE/CONTINUTY

Range

I Description

Diode

Shows the approximate forward

voltage drop

Continuit

Built - in buzzer will sound, if the

resistance under test is less than

about 70Ω

Overload Protection: 250V dc or 250V ac rms

5. BATTERY & FUSE REPLACEMENT

If the sign"

"appears on the LCD display, it indicates that battery should be replaced.

Remove screws on the back cover and open the case (see the right photo). Replace the exhausted

battery with a new one.

Accuracy

± 0.8 % of rdg ± 3 digits

± 0.8 % of rdg ± 2 digit

± 1.0 % of rdg ± 2 digit

± 5.0 % of (rdg-10digits)

± 10 digits