Aktakom APS-3310 Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aktakom APS-3310. Aktakom APS-3310 4 pages. Single output dc bench power supplies with large digital display

Imprimer la page

Operating Instructions:

1. Press the power on/off button to turn power on.

2. Adjust the voltage knob to set the desired voltage. (Voltage level is shown on the digital dis-

play)

3. Adjust the current level pot with a small regular screwdriver to set the (maximum) desired cur-

rent level. (The current of the power supply is set to be the maximum at the factory)

4. Connecting a load to the output terminals and pressing the output switch will illuminate the

output indicator light and the current output can be read on the digital display.

5. The sampling terminals are not often used. Use them under the following conditions: If the load

has a distance from the power supply, the sampling terminals may be used to compensate for the

inherent when using voltage drop a longer power line.

Sampling connection diagram:

Attention: Disconnect the installed S- and S+ shorting wires when using the sampling connections.