Acer AL1932 Manuel de démarrage rapide
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Acer AL1932. Acer AL1932 1 pages. Acer al1932: quick start
Également pour Acer AL1932 : Manuel de l'utilisateur (10 pages), Manuel d'entretien (42 pages)
Acer LCD monitor Quick Start Guide (QSG)
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean LCD Monitor screen;
-- Power off LCD Monitor and unplug the AC/DC Power Cord.
-- Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be
performed by an authorized technician.
5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F).
Storing the LCD Monitor outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
* Monitor to PC signal cable is frayed or damaged.
* Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
* LCD Monitor or the case is damaged.
Package contents
LCD Monitor
AC/DC Adapter
Assembling Your Monitor
• Put the base of monitor on the desk carefully.
• Put the monitor on flat table or plate.
Connecting Your Monitor to a Computer
• Turn off your computer and unplug your computer's power
cable.
• Connect the signal cable to the VGA output socket (VGA IN)
and the graphics card on the computer. Then tighten the
thumbscrews on the connector.
• Connect the audio input socket of the LCD monitor (AUDIO
IN) and the computer by means of the audio cable.
• Connect the plug of the AC/DC adapter to the (DC IN )
socket of the monitor , then insert the power cord into the
adapter and a properly grounded electric socket.
• Turn on your computer and monitor.
Operating Your Monitor
VGA Cable
Power Cord
Power on/off
1
POWER
Press to view OSD.
2
MENU
OSD Function
If OSD is active, press to exit a selection in OSD.
If OSD is active, press to select or adjust OSD options. If OSD is inactive, press
3
PLUS
once, then press the buttons marked
If OSD is active, press to select or adjust OSD options. If OSD is inactive, press
4
MINUS
once, then press the buttons marked
If OSD is active, press to enter a selection in OSD. If OSD is inactive, press and
5
AUTO
AUTO
the monitor will automatically optimize the position, focus and clock of your
display.
Audio cable
User manual
(CD)
Blue: power on
Orange: in sleep mode
or
to adjust the volume.
or
to adjust the volume.
English
Quick start
guide