aero-naut Princess Manuel d'instructions - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} aero-naut Princess. aero-naut Princess 17 pages. 3081/00

Glue the stringers 19 in place as far as frame 9, keeping them

parallel. Continue by gluing only the upper and lower stringers

to frames 1 - 8, then allow the glue to set hard. The central

stringer 19 can now be glued between the upper and lower

stringers; these parts define the chine of the hull. Once the

glue has set hard, carefully sand the stringers to follow the

shape of the frames.

Glue together the front end of the three chine

stringers 19 over a length of 150 mm. Trim the

joined stringers to fit neatly against the keel 12,

and offer them up to the keel 12 and frame 11.

Use a sanding block to sand back the stringers

19 so that they do not project beyond the front

edge of the keel 12 at the sides and forward.

Glue the stringers to the keel 12 and frame 11,

and allow the glue to set hard.