Acer AL2216W Manuel de l'utilisateur - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Acer AL2216W. Acer AL2216W 11 pages. Value line
Également pour Acer AL2216W : Manuel de l'utilisateur (20 pages), Spécifications (2 pages), Manuel d'entretien (44 pages), Manuel de démarrage rapide (2 pages), Manuel de démarrage rapide (12 pages), Manuel d'entretien (44 pages)

Installation instructions

Note: Read the Safety section carefully before starting the installation.

When installing your LCD monitor, consider the placement of the monitor:

To minimize the reflection of the monitor, protect your eyes, and ensure

premium quality, don't install your LCD monitor near windows or where

there is backlight. Keep the monitor at least 30 cm away from your eyes.

The upper edge of the monitor should be just a little higher than your

line of sight.

Adjust the front and back dip angles of the monitor, so that you can

view the display comfortably.

Connecting the base to the monitor

Installati

Take the base out of the box and place it on a

flat table.

Position the monitor on top of the base.

Connect the base into the neck of the monitor

along the track.

You will hear a click sound when the base

and the monitor are properly connected.

Connecting the LCD monitor to a PC

Make sure that the power supply of your PC

is turned off and the power plug is removed.

Connect and fasten both ends of the signal

cable to your PC host and LCD monitor,

respectively.

Connect the attached power cable to your LCD

monitor.

Plug the power cable into the receptacle.

Use the cable tie to bind up the power cord

and the D-sub signal cable / DVI-D cable.

Turn on the power supplies of your PC and

LCD monitor.

(optional)

Power cable

DVI signal cable

D-Sub signal cable