Acer AL2416W Manuel de l'utilisateur - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Acer AL2416W. Acer AL2416W 15 pages. Value line
Également pour Acer AL2416W : Spécifications (2 pages)

Imprimer la page

Interface for Arm Applications

Before installing to mounting device, please refer to

Fig.1-2.

The rear of this LCD display has four integrated 4 mm, 0.7

pitches threaded nuts, as well as four 5 mm access holes in

the plastic covering as illustrated in Figure 1-3. These

specifications meet the VESA Flat Panel Monitor

Physical Mounting Interface Standard (paragraphs 2.1

and 2.1.3, version 1, dated 13 November 1997).

Connecting the Display

1. Power off your computer.

2. Connect one end of the signal cable to the LCD

Monitor's D-SUB or DVI (option) port.(See Fig 1-4)

3. Connect the other end of the signal cable to the D-SUB

or DVI (option) port on your PC.

4. Make sure connections are secure.

Connecting the AC Power

1. Connect the power cord to the LCD Monitor.

(See Fig. 1-5)

2. Connect the power cord to an AC power source.

Power Management System

This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The

VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.

When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED

indicator will light yellow.

Figure 1-3

Figure 1-4

Figure 1-5