Acer AL712 Manuel de l'utilisateur - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Acer AL712. Acer AL712 13 pages. 17" (43 cm)
Également pour Acer AL712 : Manuel de l'utilisateur (9 pages), Manuel (10 pages)
Imprimer la page
Connecting the AC Power
1. Connect the power cord to the LCD Monitor.(See Fig. 1-6)
2. Connect the power cord to an AC power source.
Connecting the Audio Cable
(For AL712/AL716)
1.
Connect the audio cable to the " LINE OUT " jack on your
PC's audio card or to the front panel's "AUDIO OUT" jack
of your CD ROM drive. (See Fig. 1-7)
2.
Connect the other end of the audio cable to the LCD
Monitor's " LINE IN " jack.
Setting Up the LCD Monitor
1. Turn on the LCD monitor's hard power switch, located on
the back of the monitor
2. Turn on the LCD Monitor's soft power switch, located on
the bezel of the monitor.
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.
Chapter 2 Display Controls
User Controls
A brief description and the location of all LCD Monitor function controls and indicators:
Stereo Speakers
1
(AL712/AL716)
Speaker Volume Control
2
(AL712/AL716)
3
Soft Power Switch
4
DC Power-On Indicator
PC Audio Stereo output.
Increase Volume - Turn knob clockwise.
Decrease Volume - Turn knob counter clockwise
Press the soft power switch to switch the monitor ON/OFF.
LED lights Green color --- Power is ON.
LED lights Yellow --- Monitor is in "Power Saving Mode".
LED is off --- Power is OFF.
5
Figure 1-6
Figure 1-7
Figure 1-8
Figure 2-1