Aktobis AG WDH-BGP03Pro Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aktobis AG WDH-BGP03Pro. Aktobis AG WDH-BGP03Pro 8 pages.

Imprimer la page
During the first operation:
As the heating elements are covered with a light film of oil at the factory for reasons of
protection, you will notice a slight smell of burning and possibly also some smoke during
the first operation. This is quite normal at first and is caused by the fact that the oil film is
now burnt by the heating elements during operation.
Important safety instructions:
-
The heater is not suitable for use outdoors or in other wet or damp environments !
-
Please note that the heater can become very hot during operation, so keep a sufficient
distance from flammable or easily combustible objects at all times !
-
Do not place the heater directly next to a power socket !
-
Do not use a timer or automatic on/off switch in conjunction with this heater !
-
Never use the heater on moving surfaces, objects or vehicles ! There is a risk that the
heater may tip over.
-
It is recommended to use a separate power source (socket) only for the supply of the
heater. (Please do not use multiple sockets to operate the heater.) Furthermore,
please ensure that the power cable is always laid with sufficient distance to the heat
source.
-
Supervise the heater when children are near the appliance !
-
Watch out for electricity, never walk into or insert objects into the appliance !
-
Do not place any objects on the heater !
-
Do not block the supply and/or exhaust air of the unit and please ensure sufficient
space/clearance around the unit !
-
Ensure that there is sufficient air supply to the unit, otherwise it can lead to a reduction
in performance and, in the worst case, to overheating and/or fire !
-
Only qualified personnel or electricians are allowed to open the unit!
-
Make sure that no moisture gets into or onto the unit !
-
Only use the recommended voltage for operating the unit !
-
Make sure that the power cable is unfolded (untied) before connecting it to the socket !
-
Make sure that the plug is cleanly and properly connected to the socket before using
the appliance !
-
Never reach near the plug or socket with wet hands !
-
Do not repair defective or damaged cables on the unit yourself, you could get a severe
electric shock !
-
Make sure that highly flammable substances (e.g. gases/oils etc.) are never in the
vicinity of the unit !
-
If the connecting cable of this appliance is damaged, it must be replaced by the
manufacturer or its after-sales service or a similarly qualified person in order to avoid
hazards.
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de