American Rotary ADX 60 Manuel d'utilisation et d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation et d'installation pour {nom_de_la_catégorie} American Rotary ADX 60. American Rotary ADX 60 15 pages. Adx-cul cnc/heavy duty rotary phase converters

Imprimer la page

The following diagram shows the electrical schematic for the rotary phase converter:

Firmly snap in the green, yellow/white and red switch

terminals into the pushbutton switch body. (In the image

at right, a clear enclosure cover is used for clarity.)

f. Wire the idler:

240V:

Bolt idler leads 4, 5 & 6 together. DO NOT ground 4, 5, and 6! Insulate this

connection with electrical tape, ceramic electrical tape, or heat shrink

tubing. Connect the ground line to the ground screw inside the motor

conduit box. Inside the phase converter panel box, connect terminal A to

(1,7), terminal B to (2,8) and terminal C to (3,9). Insulate these connections

separately. Hardware for these connections is provided. DO NOT use wire

nuts for ANY idler connections!