American Sanders AVAC Q-10 Manuel de l'opérateur - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de l'opérateur pour {nom_de_la_catégorie} American Sanders AVAC Q-10. American Sanders AVAC Q-10 20 pages.
Imprimer la page
Electrical Cord Care:
Never stretch the cord tightly between the vacuum and the outlet. A cord that is stretched or
pulled will not function properly and creates a danger. After vacuuming, unplug the cord and wind
it up loosely. Do not wind the cord up by wrapping around your hand and elbow.
Grounding Instructions:
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having
equipment grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances.
WARNING:
I
mproper connection of the equipment grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded.
Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120 - Volt
circuit and has a grounded plug that looks like
the plug illustrated in sketch A below. A temporary
adapter that looks like the adapter illustrated in
sketches B and C may be used to connect this
plug to a 2-pole receptacle as shown in sketch B
if a properly grounded receptacle is not available.
The temporary adapter should be used only until a
properly grounded outlet (sketch A) can be installed by a qualified electrician. The green colored ear, lug, or the like
extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code.
(1) Prior to use, check the condition of the disposable paper filter bag. A clogged filter bag will restrict airflow,
reducing vacuum performance and increasing the likelihood of motor overheating. Note: To avoid tearing
the disposable paper filter bag, lift both the disposable paper filter bag and cloth bag at the same time.
This is especially necessary when the disposable paper filter bag is full.
(2) When necessary, hand or machine wash the cloth dust bag and let air-dry before replacing inside the
vacuum. DO NOT put dust bag inside machine dryer.
(3) Do not attempt to clean HEPA filter. If there is a lack of airflow after replacing the disposable paper filter
bag and cloth dust bag, it will be necessary to replace the HEPA filter.
(4) Rinse clean and air-dry the foam filter (below motor) when clogged. A damaged foam filter should be
replaced before operating the vacuum.
When the vacuum is not in use, it should be stored in a dry place.
ELECTRICAL CONNECTIONS
FILTER MAINTENANCE
PROPER STORAGE
3