Akura AH260LCD Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Akura AH260LCD. Akura AH260LCD 19 pages.

Imprimer la page

Using the TV features

Understanding the TV features

Multimedia - TV receiver, Video monitor and PC display, all in one
Wider viewing angle, 16:9 display - over 160 viewing angle, 16:9 ergonomical display panel
Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective
of magnetic or geomagnetic effect
200 channels storage
Sleep timer
Teletext with 252 pages memory
NICAM/A2
Dual SCART interface
Multi-language OSD

Basic Operations

Power ON/OFF
1) Connect the TV to power outlet and switch on the AC power switch. If the power
indicator is red, it means that the TV is off. You need to press the Power button
on the front control or on the remote control to turn on the TV, and the power
indicator will turn blue. Several seconds later, TV picture will display on the
screen.
2) Press the Power button on the front control or on the remote control to turn off
the TV temporarily.
3) Always release the AC power switch or remove the AC power plug from the
outlet when not using for a long period of time.
Signal source selection
Press the [CH+/CH- ] button to select TV input; press the [VIDEO] button to select SCART1 input or SCART2
input(from SCART2); press the [S-VIDEO] button to select S-VIDEO input;press the [ YPbPr] button to select
YP
P
/YC
C
input; press the [PC] button to select PC input(When you press the PC button first, you can enter
B
R
B
R
the VGA mode, when you press the PC button again, you can enter the DVI mode).
NOTE: When you press the [ YCbCr ] button, the ABORT KEY will be displayed on the screen, and this
button has no use in this TV.
Select channels by [CH+/CH-]
You can also use[CH+ / CH-] to select channels.
number decrease.
[CH+] i
ndicates channel number increase;
- 7 -
POWER
POWER BUTTON
INDICATOR
(STANDBY)
[CH-]
indicates channel