Akura AHLTV15 Manuel d'instruction - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Akura AHLTV15. Akura AHLTV15 16 pages. 15.4″, (15.25”viewable) lcd-tv
Connection steps:
Read the user guide supplied with your computer and ensure that it has a VGA connector;
Make sure that the power of the LCD-TV and the PC are off;
Connect a D type 15-pin VGA interface cable (not supplied) to the VGA video interface
connector on the PC. Then connect the other end to the VGA video interface connector on the
back of the LCD-TV. Tighten the screws on the VGA connectors once they are firmly
connected;
Turn on the power of the LCD-TV first, and then turn on the power of the PC;
Press the INPUT button to set the video input mode of the LCD-TV to "PC";
The LCD-TV can support the resolutions 1280*800/60Hz
Use the VOL- / VOL+ on the control panel or remote controller to adjust the volume.
8 Basic Operating Instructions
Turn on the LCD-TV
When the STANDBY button is pressed and the LCD-TV is turned on, the
indicator light on the front of the LCD-TV changes from red to green. When the
LCD-TV is turned on, the input mode is displayed on the screen. When the
LCD-TV is turned off using the STANDBY button, the LCD-TV will go into
standby mode and the indicator light turns red.
To totally disconnect the Tv, you must do this at the mains outlet socket
Note: the display of the input mode will disappear in 3 seconds.
Select inputs : TV / SCART / AV / S-VIDEO / PC
Press the INPUT button to select the input mode you want.
Each time you press the INPUT button, TV, SCART, AV, S-VIDEO
PC-RGB, will appear on the screen in order.
Note:
The display of the input mode will disappear in 3 seconds.
Audio control
1. Press the VOL+ button to increase the volume. A number will appear
on screen indicating the volume level.
2. Press the - VOL button to decrease the volume. A number will appear
on screen indicating the volume level.
Mute
1. Press the MUTE button to mute the sound temporarily. A Mute icon
appears on the screen.
2. Press the MUTE button again to restore the sound. The Mute icon
disappears.
Note:
When you turn the LCD-TV off, the mute function is cancelled automatically.
Page 9