Bobot VC1901A Manuel d'instructions - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} Bobot VC1901A. Bobot VC1901A 8 pages. Smart robot cordless wet and dry vacuum floor washer
Imprimer la page
OPERATION
6. If you want to activate the auto-clean function to clean the appliance, follow the
operation as below. Firstly, put the appliance onto the charger to performcharging, and
then press the Auto clean button to perform auto cleaning for 30 seconds.And the
light ring will keep illuminating during the auto-clean process.
NOTE: The auto-clean function can be only activated when the appliance is
being charged.
CLEANING THE DIRTY WATER TANK AND THE ROLLER BRUSH1. Grasp the fastener of
dirty water tank and then press the button of the dirty water tank downwards to
remove the dirty water tank (see Fig.16).
2.Remove the lid of dirty water tank and then empty the drty water tank (see Fig.17).
11
Fig.16
Fig.17
PRODUCT SPECIFICATION
3. Rinse the dirty water tank with clean water(see Fig.18).
4.Activate the uto clean"function by following the operation as above to clean
theroller brush, then remove the roller brush by following the reverse operation
mentioned inthe section of fNSTALLATION FOR THE ROLLER BRUSH".And then
store theroller brush at the corresponding position of the charger(see Fig.19).
The appliance shouldbe stored at a place with good draft and without exposure
to the direct sunlight.
REPLACEMENT OF THE ROLLER BRUSH
The roller brush should be replaced every 6 months, which may vary depending on
theoperating environment and the running time.
PRODUCT SPECIFICATION
Product name：
BOBOT DEEP830
VC1901A
Model：
Battery Capacity
2600mAh
Specification of battery pack:
DC36V / Lithium
Power：
256W
Fig.18
Fig.19
12