BobsCNC KL744 Pour commencer - Page 8

Parcourez en ligne ou téléchargez le pdf Pour commencer pour {nom_de_la_catégorie} BobsCNC KL744. BobsCNC KL744 9 pages. Table assembly
Également pour BobsCNC KL744 : Manuel d'assemblage (20 pages), Manuel d'assemblage (12 pages)

Imprimer la page

Assembly Area Requirements:

A large, clean, well lit bench top is needed. The Optional Table for the

KL 744 was specifically designed to provide an adequate assembly

surface area (69" x 61").

Two separate 110 vac 20 amp circuits for the Controller and 48 vdc

Power Supplies, and the dust collection system.

Sealing the Wood Components:

The KL series CNC Routers feature 12 mm Baltic Birch plywood. Baltic

Birch is manufactured using exterior grade adhesives, however, as a

best practice we recommend that customers seal the outer birch veneer

surface and all edges with polyurethane. Seal every wood component

with two coats of polyurethane applied according to the manufacturer's

directions.

The double-sided tape used to affix the static drive belts of the Bell

Everman Drive System to the Belt Supports has been specifically

The tab and slots in the kit have been engineered for a tight fit. You will

want to use thin coats using spray polyurethane. You may find it easier

to assemble the wood components before sealing with polyurethane if

using a brush.

Solvent (oil) based polyurethane should only be used in work areas with

adequate ventilation. BobsCNC has tested water-based acrylic poly

with acceptable results (water based poly has significantly lower VOCs

and a faster drying/curing time).