Specifying the Parameters
You can upload sharpness and contrast settings as well as a tone curve file saved with RAW
Image Task and register up to 3 of these in the camera as processing parameters.
This function is compatible with the EOS-1Ds Mark II, EOS-1D Mark II, EOS-1Ds and
EOS-1D.
For how to save a tone curve file with RAW Image Task, refer to "Processing RAW Images"
in the ZoomBrowser EX Instruction Manual.
For more information on setting the processing parameters on the camera, refer to "Setting
the Processing Parameters" in the camera's Instruction Manual.
Click [Parameters].
1
The [Parameters settings] dialog box
appears.
Select a tab to be set.
2
Specify desired settings.
3
Drag the slider left or right to specify the sharpness and contrast.
With the EOS-1Ds and EOS-1D, [Sharpness] and [JPEG Quality] are displayed. Select
the item to be set from the list box.
Click the [Apply to Camera] button.
4
The [Confirm settings] dialog box appears.
Confirm the settings and click the [OK] button.
5
The processing parameter is registered on the camera.
Click the [Close] button.
6
The [Parameters settings] dialog box closes, and the display returns to the shot
settings window.
Cover/Table of
[Standard]:
The standard tone curve is set.
[User Defined TCD1] to [User Defined
TCD3]:
Downloading Images
You can apply the tone curve file saved in
from the Camera
RAW Image Task.
With the EOS-1Ds and EOS-1D, [User
Defined] is displayed and you can select
one tone curve file.
Click the [Add] button and in the dialog box
that appears, select the tone curve file
saved on your computer.
Setting the Cameras
other than the EOS-1D
Series Cameras
Applies the settings to the camera.
Setting the EOS-1D
Closes the dialog box.
Series Cameras
Troubleshooting
3-7
Contents
Introduction
1
2
3
4
Remote Shooting
Index
Imprimer la page