BarMaid BLE-310 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} BarMaid BLE-310. BarMaid BLE-310 9 pages. 3hp commercial blender

Imprimer la page

BLENDER OPERATION

To operate the blender, proceed as follows:

1. Before the initial use, wash container assembly and lid thoroughly.

(Refer to "Cleaning Instructions") DO NOT PUT THE CONTAINER ASSEMBLY &

BLENDER BASE ASSEMBLY IN THE DISHWASHER.

2. Place the blender on a dry, clean, level surface, and press OFF.

3. Place the container onto the motor base. Make sure it rests securely on the base.

4. Plug the blender into an electric outlet.

S. Place the ingredients into the container.

4. Place the lid and feeder cap tightly on the container.

7. Select the desired speed and time by rotating dials.

8. Press ON.

NOTES

Pulse Button - Pressing the pulse button will cause the motor to run for as long as the

button is depressed. Removing your finger from the button will cause the motor to stop

running and the blades to stop turning.

Infinity Button-Pressing this button will cause the motor to run at alternating RPM until

the timer expires to thoroughly blend most mixtures.

BLENDING TIPS

1. Processing hot liquids

● Always cover the lid and feeder cap before blending hot liquids or mixtures.

● Use the feeder cap to add liquids to the container while the unit is running.

● Never stand with your face directly over the container when you are putting

ingredient through the feeder cap.

2. Blending icy mixtures

● Steps for blending ice:

1. Pour in liquid, and then add ice.

2. Place the lid and feeder cap tightly on container.

3. Set to desired speed and time.

4. Use the feeder cap to add liquids or ingredients to the container while the unit

is running.