Euro-Pro BIG SHARK EP134 Manuel du propriétaire - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Euro-Pro BIG SHARK EP134. Euro-Pro BIG SHARK EP134 4 pages. 115v., 60hz., 7.8 amps
Également pour Euro-Pro BIG SHARK EP134 : Manuel du propriétaire (4 pages)

Euro-Pro BIG SHARK EP134 Manuel du propriétaire
GETTING TO KNOW YOUR BIG SHARK
9
11
7
10
13
1. Push to Open Dust Cup (Container)
2. On/Off Power Switch
3. Suction Hole
4. Handle
5. Exhaust Cover Lock
6. Exhaust Cover
7. Shoulder Strap

Technical Specifications

Voltage:
115V~ 60Hz.
Power:
7.8 Amps, 900 Watts
Debris Screen
12
8
8.
Oval Brush
9.
Holes for Attaching the Shoulder Strap
10.
Dust Cup (Container)
11.
Flexible Hose
12.
Crevice Tool
13.
Hepa Dust Cup Filter
2
Warning:
Always unplug from
electrical outlet before opening the dust
cup (container).
Note
: HEPA dust cup filter must be
used when operating the hand vacuum.
Using The Unit As A Hand
Vacuum
1. To open the dust cup (container), push
button and pull out the dust cup. Verify
that the HEPA dust cup filter inside,
then attach the dust cup (container) to
the hand vacuum.
HEPA Filter
2. To use the Hand Vacuum with the
shoulder strap, attach it to the unit as
shown below.
3. To attach the crevice tool or oval
brush to the Hand Vacuum, push
brush into the suction hole, as
shown below.
IMPORTANT: This motor is equipped with a motor protective thermostat.
OPERATING INSTRUCTIONS
4. To use the flexible hose, push the
smaller end of the hose into the
suction hole, then attach the desired
accessory to the other end of the
flexible hose, as shown below.
How To Operate Your
Hand Vacuum
1. Hold the hand vacuum firmly in
your hand by the Handle.
2. Push the On/Off Power Switch to
"On" position.
3. Start vacuuming.
CAUTION:
very powerful unit. Make sure that you
hold it firmly, otherwise it can slip out of
your hand and cause injury.
Motor Thermostat
If for some reason the vacuum cleaner should overheat,
the thermostat will automatically turn the unit OFF.
Should this occur, unplug the vacuum cleaner from wall
outlet or turn off switch. Allow the unit to cool. To restart,
re-plug into wall outlet or turn switch back on.
3
The Hand Vacuum is a