Euro-Pro EP621HR Manuel du propriétaire - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Euro-Pro EP621HR. Euro-Pro EP621HR 6 pages. Lightweight upright vacuum

Imprimer la page

PRECAUTIONARY MEASURES

IMPORTANT:

If the suction opening in the unit or the hose is BLOCKED, switch off

the vacuum cleaner and remove the blocking substance before you

start the unit again.

1. Do not operate the vacuum cleaner

too close to heaters, radiators or

cigarette butts.

2. Before inserting the power plug into

the wall outlet, make sure that your

hands are dry.

3. Before you start vacuuming, make

sure to remove large or sharp objects

that might damage the dust cup

debris screen.

4. When pulling out the power plug

from the wall outlet, pull the plug not

the power cord.

5. Do not pick up anything that is

burning or smoking such as

cigarettes, matches or hot ashes.

6. Do not use without ALL filters in

place.

OPERATING INSTRUCTIONS

Warning:

Always empty the dust

cup container and clean the HEPA

filter, filter ring and Debris Screen

before each use and during

prolonged usage.

Never over fill the dust cup container -

remove dirt and clean the HEPA filter,

filter ring and debris screen when dirt in

dust cup is at or below the "MAX" level or

during prolonged usage because you

could risk damaging the motor. If you

wash the Hepa filter and filter ring,

make sure that they have completely

air dried for 24 hours before inserting

back into the vacuum.

Please Note: The HEPA Filter is

washable. It should, however, be

replaced every three (3) to six (6)

months to ensure peak performance of

your vacuum.

The exhaust filter and filter ring are also

rinseable but they should be air dried for

24 hours before replacing into the

vacuum. They should however be

replaced every three (3) months to

ensure peak performance of your

vacuum.

Important: Make sure that ALL filters

are completely dry before re-installing

back in the vacuum.

Cleaning the Filter Ring

1. Around the HEPA filter

there is a filter ring.

This is washable in

lukewarm water.

(Fig. 16) To remove

the filter ring, slide it

off the HEPA filter.

2. We recommend

washing the filter ring

when you are

washing your HEPA

filter. Always allow the

filter ring to air dry for

Fig. 16

24 hours before replacing onto

the HEPA filter. Never run the vacuum

without all the filters in place.

Note: This is a washable filter, but we

recommend replacing it every three (3)

months.

Changing & Cleaning the Exhaust

Filter

The exhaust filter is a rinseable filter but

should be replaced every three (3)

months.

• To remove the exhaust filter cover,

depress the filter cover lock and pull

the filter cover out. Remove the filter.

(Fig. 15)

• Rinse the exhaust filter in lukewarm

water and air dry the filter completely

for 24 hours. Do not use a washing

machine to rinse the filter. Do not use

a hair dryer to dry it. Air dry only.

Never operate the vacuum without the

exhaust filter

in place.

• When the

Exhaust

filter is

Filter

Cover

dry, replace

into

the exhaust

filter

Fig. 15

cover and

replace

on the vacuum.

• A severely

soiled or

clogged filter

should

be thoroughly

rinsed with

fresh tepid water. A

mild detergent can

be used if required.

Filter

Cover

Lock