Barnant Company PK25 Manuel d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Barnant Company PK25. Barnant Company PK25 13 pages. Barnant/ponndorf hose pumps

SAFETY PRECAUTIONS

Safety

These instructions contain basic recommendations that should be followed during installation, set up, operation and
maintenance. Therefore, these operating instructions must be read by the installer, operators, and other personnel
before assembly and operation. These instructions must be available at all times to the operator. The customer must
consult the motor operating manual for additional instructions and safety precautions.

Precaution Icons

Those safety recommendations in the operating instructions, which must be followed to avoid personal injury and/or
damage to the pump, are marked with the appropriate precaution icons.
Instructions written on the pump assembly must be followed at all times and kept in a readable condition.
For example:
g
Direction of rotation arrows,
g
Marking for fluid connections.

Operator Qualifications and Training

Personnel responsible for operation, maintenance, inspection, and assembly must be suitably qualified for this work.
The customer must be responsible for the competence and supervision of staff. If suitably qualified personnel are not
available, training must be provided. Training can be provided by the Manufacturer or Distributor, for a fee, at the
request of the customer. The customer must ensure that the operating instructions are fully understood by all staff.

Dangers of Ignoring the Instructions

Ignoring the safety instructions can endanger people, the environment, and equipment. Ignoring these instructions will
also invalidate the warranty.
Not following the safety instructions can lead to:
g
Machinery failure,
g
Personal injury caused by electrical, mechanical, or chemical hazards,
g
Endangering the environment through leakage of hazardous materials.

Safety Awareness at Work

The safety instructions contained in the operating manual must be observed, in addition to any national or local codes
and regulations for the prevention of accidents and the customer's own safety regulations.

Safety Instructions for the Operator

g
Guards which cover moving parts (e.g. coupling) must not be removed while the machine is in operation.
g
Any electrical hazard must be avoided (refer to local electrical codes). Do not use the pump in damp or wet locations.
Do not use damaged cords or plugs. Do not handle plug with wet hands. Use only properly grounded power outlets.
g
Do not operate the pump in the presence of flammable liquids or gases to avoid creating a fire or explosion.
g
Do not operate the pump when you are tired, ill, or under the influence of alcohol, drugs, or medication.
g
Always wear safety glasses or similar eye protection.
Barnant/Ponndorf
3