Air cat 6330 Mode d'emploi, liste des pièces et garantie - Page 2
Parcourez en ligne ou téléchargez le pdf Mode d'emploi, liste des pièces et garantie pour {nom_de_la_catégorie} Air cat 6330. Air cat 6330 4 pages. Nibbler
Imprimer la pageImportant Warnings - Grinders & Cut-Off Tools
SPECIFICATIONS
Model
Number
6330
Air Supply
Tools of this class operate on a wide range of air pressure. It is recommended that air pressure of these tools measures 90 PSI at the tool while running free. Higher
pressure and unclean air will shorten the tool's life because of faster wear and may create a hazardous condition and void the warranty. Water in the air line will
cause damage to the tool. Drain the air tank daily. Clean the air inlet lter screen on at least a weekly schedule. The recommended hookup procedure can be viewed
in the illustration below. The air inlet, used for connecting air supply, has standard 1/4" NPT American Thread. Line pressure should be increased to compensate for
unusually long air hoses (over 25 feet). Minimum hose diameter should be 3/8" I.D. and ttings should have the same inside dimensions.
Free Speed
Cutting
(RPM)
Capacity
2600
18 Gauge
Weight
Length
(lbs)
(In)
2- 1/4
7-0
Air Cons.
(CFM)
3.5