DOMPEL Smaltbell Lotus 6 Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} DOMPEL Smaltbell Lotus 6. DOMPEL Smaltbell Lotus 6 6 pages.

ENGLISH

location of installation

Install your Dompel product in a level place with no grooves or splices,

preventing rocking and vibration. The location must be airy and it must not

allow straight sunlight and it must be away from sources of heat (stoves,

ovens, etc.) and flammable products. Do not install your product outdoors.

cleaning and maintenance

Do not use metal spatulas, brushes and cleaning agents such as alcohol, acetone, kerosene, gasoline, bleach,

thinner, solvents, varsol, vinegar or other chemicals or abrasives such as sandpaper or steel brushes.

To easily clean it, use a solution of warm water with a neutral soap and then wipe dry carefully. If chemical products

reach the upholstery, clean as soon as possible, preventing the products from staining or drying the fabric. The

plastic parts can not be washed with boiling water. Chromed metal components can be cleaned with a soft, dry

flannel, and silicone-based automotive wax can be used to increase gloss and durability, in this case perform the

task following the wax manufacturer's instructions. Perform periodic cleaning, accumulated dust affects the beauty

of the product making it difficult to clean the product.

IMPORTANT

Never drag the product, if necessary, ask other person's help to remove the product from the place. Do

not place containers with high temperature on your product, at the risk of damaging plastic parts or the

upholstery.

INSTALLATION AND ASSEMBLY

Remove all components from the carton. The 4 casters are in a plastic bag inside the carton. The assembly

of this trolley is totally manual and requires no tools.

Manually fit the 4 casters (C) in the lower part of

the base (B). Make sure they are well fitted and

aligned when resting on the floor.

Assemble the first 4 extenders (E) on the top of

the shelf (A).

Assemble the 4 shelf finishings (D) on the last

shelf (A).

Merely illustrative images.

Products may suffer changes in its components without prior warning. If any questions, contact Dompel.

Manually fit the first shelf (A) on top of the

base (B).

Repeat the manual assembly of all shelves (A)

interspersed with the extenders (E) until the last

module. Note: the number of modules changes

according to the model chosen by the user at

the time of purchase.

Finish the assembly by manually fitting the top (F)

to the last shelf (A). The fitting is fixed by "clicks"

type tabs.

security

Avoid accidents. After

unpacking the product, keep

all the pack material out of

children's reach.