American Standard 9380.000 Cambridge Console Table Manuel d'instructions d'assemblage et d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'assemblage et d'installation pour {nom_de_la_catégorie} American Standard 9380.000 Cambridge Console Table. American Standard 9380.000 Cambridge Console Table 6 pages. Assembly instructions
Imprimer la page
CONSOLE TABLE FRAME & VANITY INSTALLATION
Unpack unit carefully, taking care that bottom shelf does not drop and damage front legs (see Figure 2).
Provide suitable reinforcement for anchoring the vanity to the wall. Centerline of reinforcement should be 31-3/4" up
from the floor (see Figure 1).
The molding needs to be notched to seat the vanity flush against the wall.
Rough in supply lines and waste per rough-in dimensions.
Drill at least two 3/8" O.D. anchoring holes through the centerline of the rear stringer of the vessel stand, located 3/4"
down from the top of the table (see Figure 2).
Move the console into place and level with the adjustable glides on the bottom of the feet. The glides can be
adjusted outward up to 1" but it is recommended not to exceed 1/2" if possible. Anchor it to the wall through at least
2 of the anchoring holes in the rear of the vanity (see Figure 2).
Continue with installation appropriate for top and sink options chosen.
FIGURE 1
FIGURE 2
C/L of 2 x 6
Reinforcement
31-3/4"
Finished
Floor
ADJUSTABLE GLIDES
- 3 -
ANCHORING HOLES
IN REAR STRINGER
(under each foot)
730 1 0 0 3 - 1 0 0 R e v. A