Domus 25016 Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Domus 25016. Domus 25016 4 pages.

1. Refit the Cable Anchorage

2. Fit main body onto the Backcover. Adjusting the light direction you desired, then tighten the screws.

3. Switch the main power on.

6x27mm PA4x30mm

Ø88mm

Notes for electrician

• The LED lamp should be wired to its own light switch.

• Do not interconnect with other lights on the same switch.

• Earth connection must be required.

• Multiple Muro Fittings cannot be wired to a single switching point.

Understanding the controls

Adjusting the duration time:

The length of time that remains switched on after activation can be

adjusted from (10±5) seconds to (4±1) minutes. Rotating the TIME

knob + to - will reduce the duration time.

Note: Once the light has been triggered by the PIR sensor any

subsequent detection will start the timed period again from the

beginning.

139mm

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia

Phone: 02 9554 9600

OFF

Fax: 02 9554 9433

www.domuslighting.com

Installation Manual

6mm

30mm

TIME

SENS

LUX

Control Knob

Ø88mm