BARO BR-220T Manuel d'installation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} BARO BR-220T. BARO BR-220T 15 pages. Tablet monitors

Area Mapping

1. Open Windows Control Panel and click

A "Tablet" folder is also created in the "Programs" list of the Start Menu during installation, so you

may also find it there.

2. Enter Mapping and set the Select the Monitor as where the touch sensor will be active. In

our installation, only the tablet monitor was connected, so "Full Monitor" was selected..

, typically found in the "Programs" category.

www.barosnt.com

3. If you find the pen touch is

inaccurate and calibration is required

upon installation of the monitor, click

Calibrate for manual adjustment.

During calibration, touch the pen tip

to the center of the red targets that

appear on the screen. After touching,

the next target will appear. 4 appear

in total, 1 in each corner. It is

recommended to use this calibration

method over the built in Windows

calibration.