DOMUS LINE DOT FW Manuel d'installation - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} DOMUS LINE DOT FW. DOMUS LINE DOT FW 17 pages.

INSTALLATION MANUAL

wire of the power supply; then connect the DOT FW output wire (OUT)

connector (L) to the Micro24 (H) distributor wire connector (M) which has

10 slots for the connection of 24Vdc LED lighting devices.

- DOMUS Line guarantees the product only if powered with a Converter

supplied by us.

HOW THE DOT FW WORKS

- ON-OFF function. The lighting devices connected to DOT FW are switched

on and off through brief hand contact with the device surface.

- DIMMER and LEVEL MEMORY Function. By touching DOT FW for longer,

you can regulate the light intensity of devices connected to it (DIMMER).

The brightness level selected will be memorised until the next adjustment

(LEVEL MEMORY).

WARNING

- If the external flexible wires of this device are damaged they must be

replaced by the manufacturer or a service centre authorised by the

manufacturer.

- DOT FW must be connected directly to a 12Vdc or 24Vdc stabilised voltage

safe power supply (sold separately) and must never be connected to other

electronic switches or DIMMERS of any type. We advise not connecting

DOT FW to a traditional, mechanical home environment switch.

Weitere Infos unter: http://www.lignoshop.de

- DOT FW must not be installed near heat sources or in the vicinity of

electromagnetic fields that could alter or compromise operation.

WARRANTY

The warranty on the device is valid only if powered by a power supply

provided by DOMUS Line. The warranty's general terms and conditions for

this device are available at www.domusline.com