American Standard One T064.501 Manuel d'instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} American Standard One T064.501. American Standard One T064.501 7 pages. American standard faucet installation instructions

Imprimer la page
Available Trim Kits
Colony
Tropic
Dazzle
One
Town Square
R110 Valve Body Shown

GENERAL DESCRIPTION:

Cast brass body, washerless ceramic disc valve cartridge
with back-to-back capability and hot limit safety stop. Cycles
from "off" to "cold" to "hot". Pressure balancing cartridge
maintains constant output temperature in response to
changes in relative hot and cold supply pressure. One-half
inch inlets and outlets (choice of direct sweat, threaded, or
PEX). Available with screwdriver stops. Rough-in plaster
guard designed for use as thin-wall mounting adaptor. Valve
body will accept a variety of decorative Bath/Shower trims.

PRODUCT FEATURES:

Cast Brass Valve Body:
lifetime. Ideal material for prolonged contact with water.
Ceramic Disc Valve Cartridge:
drip-free performance. Allows easy fine tuning of temperature
(125˚handle rotation from off to hot).
Pressure Balancing Valve Cartridge:
output temperature in response to changes in hot and cold
supply pressure. Diaphragm system engineered to eliminate
cross flow. Avoids failure due to mineral deposits - ideal for use
in hard water
Back-to-Back Capability:
quickly and easily.
Adjustable Hot Limit Safety Stop:
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Exclusive Plaster Guard:
protect valve during installation and serve as a mounting plate
for thin-wall installations. 2 piece design allows valve to be
tested prior to trim installation.
Wide Rough-in Range:
SUGGESTED SPECIFICATION:
Bath/shower fitting shall feature a cast brass body. Shall feature ceramic disc valve cartridge which is capable of back-to-back
installation. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to
mineral deposits. Shall also feature hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model #
R11____, Trim Kit - American Standard Model # ____.____.
© 2008 AS America Inc.
Standard
Hampton
O
ff
o t
H
Enfield
Amarilis
Durable - Quality that will last a
Assures a lifetime of
Maintains constant
Hot and cold can be reversed
Limits the amount of
Plaster guard is designed to
From 1-5/8" to 3-1/4".
PRESSURE BALANCE BATH/SHOWER FITTING
MODEL NUMBER:
R110 Pressure Balance Rough Valve Body only
Direct sweat inlets/outlets. LESS trim.
R110SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Direct sweat inlets/outlets. Screwdriver stops. LESS trim.
R115 Pressure Balance Rough Valve Body only
Female thread inlets/outlets. LESS trim.
R115SS Pressure Balance Rough Valve Body only
with Screwdriver stops
Female thread inlets/outlets. Screwdriver stops. LESS trim.
R117 Pressure Balance Rough Valve Body only
PEX inlets/Direct sweat outlets. LESS trim.
R117SS Pressure Balance Rough Valve Body only
with Screwdriver stops
PEX inlets/Direct sweat outlets. Screwdriver stops. LESS trim.
See reverse for available trim kits.
41mm TO 83mm
(1-5/8" TO 3-1/4")
FINISHED
WALL
1880mm
(74")
FOR HEAD
CLEARANCE
457mm
(18")
OPTIONAL
25mm
(1")
102mm
(4") REF.
TOP OF
TUB RIM
BOTTOM
OF TUB
109mm
(4-1/4")
SHR.
1/2" NOM.
COPPER
52 mm
SWEAT
(2-1/32")
TUB 1/2" NOM.
1/2" PEX INLETS
COPPER SWEAT
(ASTM F1807)
PEX (R117)
B1
UPGRADABLE
TEMPERATURE CONTROL VALVE
VALVE BODY OPTIONS
INLETS
103 mm
(4-1/16")
1/2"
SHR. 1/2" NOM.
NPT
COPPER SWEAT
INLETS 1/2" NOM.
COPPER SWEAT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (R110)
149 mm
(5-7/8")
SHR. 1/2" NOM.
COPPER SWEAT
INLETS
1/2" NPT
TUB 1/2" NOM.
COPPER SWEAT
SWEAT (STOPS) (R110SS)
INLETS
86 mm
(3-3/8")
86 mm
(3-3/8")
THREADED (R115)
149 mm
(5-7/8")
1/2"
COPPER
SHR.
1/2" NOM.
COPPER
SWEAT
TUB 1/2" NOM.
COPPER SWEAT
THREADED (STOPS) (R115SS)
165mm
(6-1/2")
SHR.
1/2" NOM.
COPPER
SWEAT
104 mm
(4-1/16")
TUB 1/2" NOM.
COPPER SWEAT
PEX (STOPS) (R117SS)
51.5 mm
(2-1/32")
103 mm
(4-1/16")
51 mm
(2")
103 mm
(4-1/16")
SHR
1/2" NPT
INLETS
1/2" NPT
TUB PORT
1/2" NPT
103 mm
(4-1/16")
INLETS 1/2" NPT
52 mm
(2-1/32")
104 mm
(4-1/16")
1/2" PEX INLETS
(ASTM F1807)