Barox PC-IA500 Manuel de l'utilisateur - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Barox PC-IA500. Barox PC-IA500 7 pages. Industrial switch

Introduction

This hardened designed industrial 5 port 10/100M Ethernet Switch is equipped with wide range VDC

power input. It is suitable for heavy usage areas such as hazardous environments or central control

place where a reliable device is critical. It is an ideal solution for Industrial Automation, IP surveillance,

traffic monitoring and a wide range of applications. It has been rigorously tested for your Security,

Transportation and Telco applications.

Installation package

This unit can be din-rail mounted or wall-mounted. Din-rail brackets and wall-mounted brackets are

included.

Wall mount

bracket x 2

This unit comes with a 4 pin terminal block. It can be operated from 12-56VDC power source. Always

make sure your input voltage is within this supported voltage range for each model

WARNING -- Any exceeded input voltage will not make this unit function and may damage this unit.

To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-, +V2- and

ground. Connect positive wires to V+, connect negative wires to V-, and connect a neutral wire to the

ground screw.

+V1- is for power input one connection.

+V2- is for power input two connection.

6 pin Terminal Block x1

Philips Head Screw x 4

Din Rail Bracket x 1

Page 2/7