American Standard CHAMPION 2525LCH-RHO Manuel d'installation et d'utilisation - Page 10
Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} American Standard CHAMPION 2525LCH-RHO. American Standard CHAMPION 2525LCH-RHO 15 pages. Whirlpools and air baths, corner/5' x 36" air bath/5' x 36"/6' x 36"/5' x 32" ia-lho/5' x 32" ia-rho/5' x 32"/6' x 36" oval
TYPICAL FLANGE MOUNTING DETAIL
SUGGESTED WHIRLPOOL / BATH
INSTALLATION METHOD
WOOD
STUD
STUDS
WATERPROOF DRYWALL
OR CEMENT BOARD
ROOFING NAIL
SEALANT
TUB
STEEL
STEEL
STUDS
STUD
WATERPROOF DRYWALL
OR CEMENT BOARD
TILE
SEALANT
TUB
SECURE THE BATH TO THE STUDS AS SHOWN
FOR WOOD OR STEEL STUD CONSTRUCTION.
UNDER DECK MOUNTING INSTRUCTIONS
Please note that care must be taken to protect the surface of the tub during all aspects of the installation.
Do not drill or cut the bath deck with the tub directly beneath it as damage to the tub may result.
1. Install the tub per the installation instructions provided with the unit.
2. Prepare the bath deck support structure per the local codes. Note - the bath deck must be self supporting.
3. Cut bath deck to your specifications.
4. Place the bath deck in position and trace the opening on the tub with a soft pencil. Do not drill or cut the bath
deck with the tub directly beneath it as damage to the tub may result.
5. Remove the bath deck and apply a generous bead of waterproof sealant on the outer edge of the traced line.
6. Replace the bath deck and secure it into place.
7. Apply additional sealant along the tub and bath deck interface as necessary to ensure a watertight seal.
8. Remove excess sealant per the manufacturer's instructions.
Finished bath deck surface material must be
self-supporting and secured per local codes
755031-100 Rev. A
TILE
1 x 3 (25 x 76mm) WOOD
STRINGER FULL LENGTH
WASHER
4" (102mm)
DRYWALL
SCREW
1 x 3 (25 x 76mm) WOOD
STRINGER FULL LENGTH
Waterproof
Sealant
Bathtub
TYPICAL INSTALLATION -
19-1/2
(495mm)
* SEE CUTOUT
TEMPLATE PROVIDED
UNLESS AN ACCESS OPENING OF AT LEAST
12" x 24" (305 x 610mm) IS PROVIDED,
WARRANTY SERVICE WILL NOT BE PERFORMED.
Bath deck support material
Tub support structure per installation
instructions provided with the tub
10
CORNER
WHIRLPOOL
ACCESS PANEL