American Standard Colony 2740.218 Spécifications - Page 2
Parcourez en ligne ou téléchargez le pdf Spécifications pour {nom_de_la_catégorie} American Standard Colony 2740.218. American Standard Colony 2740.218 2 pages. 5' x 30" w/integral apron whirlpool & bathing pool high gloss acrylic
Également pour American Standard Colony 2740.218 : Fiche technique (2 pages)
Imprimer la page
6-1/4
(159mm)
C/L OF DRAIN
3/4
(19mm)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
1-1/2 O.D.
TAILPIECE
29-7/8
(759mm)
C/L OF
SUPPLIES
HORIZONTAL TAILPIECE
ABOVE FLOOR OUTLET
1-1/2 (38mm)
OPTIONAL TO
7/8 WATER
FINISHED FLOOR
RETENTION
USUALLY BETWEEN
FLANGE
65 & 78
(3 SIDES)
(1651 & 1981mm)
C/L OF
OVERFLOW
3
(76mm)
TOP OF
DECK
19-1/4
(489mm)
ROUGH
FLOOR
3-3/4
(95mm)
BATH SUPPORT
MATERIAL
GENERAL SPECIFICATIONS FOR 2740 WHIRLPOOL
59-7/8 x 29-7/8 x 19-1/4 (1521 x 759 x 489mm)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
3
CUBE (FT
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
NOTES:
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
BATH TO BE INSTALLED ABOVE FLOOR LINE AS A RECESS INSTALLATION.
LEFT HAND OUTLET SHOWN, RIGHT HAND REVERSE DIMENSIONS (2740.118).
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by
ANSI Standards Z124.1 and A112.19.7.
responsibility is assumed for use of superseded or voided pages.
COLONY™ 5' X 30" w/INTEGRAL APRON
59-7/8
(1521mm)
WATER
RETENTION
FLANGE
(3 SIDES)
14-1/8
(359mm)
ON/OFF
SWITCH
PUMP
ACCESS TO PUMP/MOTOR
(1) AIR VALVE
THROUGH REMOVABLE
FRONT ACCESS PANEL
(6) JETS
C/L OF
SHOWER ARM
FINISHED
WALL
C/L OF
VALVES
C/L OF
12
SPOUT
(305mm)
OPT.
4
LEVELING STRINGER
(102mm)
NOT FOR SUPPORT
UNDERSIDE
OF DECK
19
(483mm)
2-1/2
(64mm)
105 Lbs. (47 Kgs.)
480 Lbs. (216 Kgs.)
45 Gal. (171 L)
38 Gal. (144 L)
20 x 46 (508 x 1168mm )
25-1/2 x 55-1/2(648 x 1410mm )
11-1/2 (292mm)
39 Lbs./Sq.Ft. (188 Kgs./Sq.m)
16.7
33.0
1 HP, 9.9 AMPS,120V.
These measurements are subject to change or cancellation. No
© 1999 American Standard Inc.
WHIRLPOOL AND BATHING POOL
6-1/4
(159mm)
C/L OF DRAIN
3/4
(19mm)
FINISHED
WALL
SEE FITTING
SPECS FOR
DIMENSIONS
1-1/2 O.D.
TAILPIECE
29-7/8
(759mm)
C/L OF
SUPPLIES
HORIZONTAL TAILPIECE
ABOVE FLOOR OUTLET
1-1/2 (38mm)
OPTIONAL TO
7/8 WATER
FINISHED FLOOR
RETENTION
USUALLY BETWEEN
FLANGE
65 & 78
(3 SIDES)
(1651 & 1981mm)
C/L OF
OVERFLOW
3
(76mm)
TOP OF
DECK
19-1/4
(489mm)
ROUGH
FLOOR
3-3/4
(95mm)
BATH SUPPORT
MATERIAL
GENERAL SPECIFICATIONS FOR 2740 BATHING POOL
59-7/8 x 30 x 19-1/4 (1521 x 762 x 489mm)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
3
CUBE (FT
)
HIGH GLOSS ACRYLIC
59-7/8
(1521mm)
WATER
RETENTION
FLANGE
(3 SIDES)
(359mm)
C/L OF
SHOWER ARM
FINISHED
WALL
C/L OF
VALVES
C/L OF
12
SPOUT
(305mm)
OPT.
4
LEVELING STRINGER
(102mm)
NOT FOR SUPPORT
UNDERSIDE
OF DECK
19
(483mm)
2-1/2
(64mm)
70 Lbs. (32 Kgs.)
462 Lbs. (208 Kgs.)
47 Gal. (178 L)
20 x 46 (508 x 1168mm )
25-1/2 x 55-1/2(648 x 1410mm )
11-1/2 (292mm)
37 Lbs./Sq.Ft. (179 Kgs./Sq.m)
16.7
33.0
14-1/8