d2itsu APD-12HR Manuel de l'utilisateur - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} d2itsu APD-12HR. d2itsu APD-12HR 20 pages.

INSTALLATION INSTRUCTIONS (optional)

INSTALLATION INSTRUCTIONS

Location

- The air conditioner should be placed on a firm

foundation to minimize noise and virbration. For

safe and secure positioning, place the unit on a

smooth, level floor strong enough to support the

unit.

- The unit has casters to aid placement, but it

should only be rolled on smooth, flat surfaces.

Use caution when rolling on carpet surfaces. Do

not attempt to roll the unit over objects.

- The unit must be placed within reach of a

properly rated grounded socket.

- Never place any obstacles around the air inlet

or outlet of the unit.

- Allow 30cm to 100cm of space from the wall

with for efficient air-conditioning.

Window slider kit Installation

Your window slider kit has been designed to fit

most standard Vertical and horizontal window

applications, However, it may be necessary

for you to improvise/modify some aspects of

the installation procedures for certain types

of window. Please refer to Fig. 6& Fig.7 for

minimum and maximum window openings.

Window slider kit can be fixed with a bolt

(see Fig.7a).

Note: If the window opening is less than the

mentioned minimum length of the window slider

kit, cut that one with a hole in it short to fit for

the window opening.

Do never cut out the hole in window slider kit.