American Standard Scala Oval 2645.018 Fiche technique - Page 2
Parcourez en ligne ou téléchargez le pdf Fiche technique pour {nom_de_la_catégorie} American Standard Scala Oval 2645.018. American Standard Scala Oval 2645.018 2 pages. 5-1/2 whirlpool
Également pour American Standard Scala Oval 2645.018 : Liste des pièces (1 pages)
Imprimer la page
302mm
(11-7/8)
RECOMMENDED FITTING LOCATION
64 X 330mm (2-1/2" x 13")
HAND SHOWER
LOCATION
914mm
(36)
229mm X 305mm
(9 X 12) CUTOUT
FOR DRAIN
419mm
(18)
44mm
(1-3/4)
C/L OF
210mm
DRAIN
(8-1/4)
LEVELING STRINGER
(NOT FOR SUPPORT)
INTEGRAL
FEET SUPPORT
1-1/2 N.P.T.M. THREADS
1-1/2 O.D. TAILPIECE
GENERAL SPECIFICATIONS FOR 2645 WHIRLPOOL
INSTALLED SIZE
66 x 36 x 19-3/4 In. (1676 x 914 x 502mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION.
SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY
OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
OPTIONAL APRON 9266.018 OR 9366.018 AVAILABLE AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH
CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY
INSTALLER.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
1676mm
(66)
6mm
(1/4)
OUTLINE OF CUTOUT
TYP.
1626mm X 864mm
51mm
25mm (1)
(64 X 34)
(2)
TYP.
ON/OFF
SWITCH
PUMP
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
38mm
102mm
(1-1/2)
(4)
464mm
(18-1/4)
502mm
(19-3/4)
44mm
(1-3/4)
457mm
(3-5/8)
95 Lbs. (43 Kg.)
595 Lbs. (268 Kg.)
60 Gal. (227 L)
55 Gal. (208 L)
46 x 24 In. (1168 x 610mm)
62 X 31-1/2 In. (1575 x 800mm)
13-1/4 In. (337mm)
36 Lbs./Sq.Ft. (175 Kgs/Sq.m)
25.6
45.1
1.1 HP, 9.9 AMPS,120V.
© 2003 American Standard Inc.
SCALA OVAL 5-1/2'™
WHIRLPOOL & BATHING POOL
302mm
(11-7/8)
RECOMMENDED FITTING LOCATION
64 X 330mm (2-1/2" x 13")
HAND SHOWER
LOCATION
914mm
(36)
229mm X 305mm
(9 X 12) CUTOUT
FOR DRAIN
419mm
(18)
44mm
(1-3/4)
C/L OF
210mm
DRAIN
(8-1/4)
LEVELING STRINGER
(NOT FOR SUPPORT)
INTEGRAL
FEET SUPPORT
1-1/2 N.P.T.M. THREADS
1-1/2 O.D. TAILPIECE
GENERAL SPECIFICATIONS FOR 2645 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
HIGH GLOSS ACRYLIC
1676mm
(66)
6mm
(1/4)
OUTLINE OF CUTOUT
TYP.
1626mm X 864mm
51mm
25mm (1)
(64 X 34)
(2)
TYP.
38mm
102mm
(1-1/2)
(4)
502mm
(19-3/4)
464mm
(18-1/4)
44mm
(1-3/4)
457mm
(3-5/8)
66 x 36 x 19-3/4 In.
(1676 x 914 x 502mm)
75 Lbs. (34 Kg.)
575 Lbs. (259 Kg.)
60 Gal. (227 L)
46 x 24 In. (1168 x 610mm)
62 X 31-1/2 In. (1575 x 800mm)
13-1/4 In. (337mm)
35 Lbs./Sq.Ft. (169 Kgs./Sq.m)
25.6
45.1