Canon XA10 Configuration de base - Page 4

Parcourez en ligne ou téléchargez le pdf Configuration de base pour {nom_de_la_catégorie} Canon XA10. Canon XA10 4 pages. Canon xa10 hd camcorder
Également pour Canon XA10 : Brochure & Specs (2 pages), Manuel de l'utilisateur (2 pages), Brochure & Specs (2 pages), Manuel d'étude (12 pages), Manuel rapide (2 pages)

CANON XA-10 BASIC SETUP!

AUDIO SETUP OF THE CAMERA

ACTIVATING THE HEADPHONE PLUG

•

Touch FUNC > MENU

• Touch the wrench tab

• Touch AV/Headphones > Headphones, then

• plug in your headphones

• MENU > touch Volume then

SETTING THE XLR CHANNEL TO RECORD STEREO

• Touch FUNC > MENU

• Touch the camera tab

• touch XLR Rec Channel /

• touch the X tab to quit.

*recording in stereo ( 1 mic going to both channels 1 & 2 )

will give the voice more presence and depth.

Note: if you are using 2 external mics you must change the

XLR REC channel to CH1 > CH1 so that the 2nd plug will work.

SETTING UP THE EXTERNAL MIC

• set audio input switch to EXT .

• plug a mic into an CH1 XLR .

• set input to MIC +48v: this provides power to the mic

***WARNING: if using a wireless mic, set the input switch

to MIC. Using the MIC +48v will cause interference.***

ADJUSTING THE MIC LEVELS

• have your subject speak in a normal voice

• adjust the dials so the audio meter levels goes a little

past -20db ( ideal level is -18db ) when the sound is the

loudes

to adjust.

page 4