Canon XF300 Manuel d'instruction - Page 26

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Canon XF300. Canon XF300 38 pages. Canon xf300 professional camcorder
Également pour Canon XF300 : Brochure (27 pages), Manuel de l'utilisateur (2 pages), Instructions (2 pages), Instructions (2 pages), Instructions (2 pages), Spécifications (6 pages), Instructions d'installation et de dépannage (2 pages)

Editing Clips and Associated Metadata

When a clip contains shot marks or event marks, these marks will appear in the preview panel, below

or above the playback position slider.

Shot mark

Event mark

You can add a shot mark at any point in the clip. Only Mark 1-type shot marks can be added using XF

Utility.

In the clips panel, select the clip to which you want to add shot marks.

In the preview panel, pause the playback at the frame you want to mark with a shot mark.

Click

•

Up to 100 shot marks (Mark 1 and Mark 2 combined) can be added to a single clip.

•

Shot marks cannot be added to the first frame of a clip.

Mark 2-type shot marks can be added to a clip only using the camcorder.

•

There are two types of shot marks, Mark 1 and Mark 2, that you can add freely at

any point in the clip. The icon is the same regardless of the shot mark type.

Event marks are added automatically while recording in response to predefined

changes. For details, refer to the camcorder's Instruction Manual. The icon is the

same regardless of the trigger event but you can check the event type in the

Details column of the mark list.

A Mark 1-type shot mark will be added at the selected position and a

playback position slider.

In some cases, the actual position of the shot mark may be off by up to 0.5 second from the

selected frame.

You can also use the menu by clicking Edit > Add Shot Mark.

NOTES

Shot mark

Event mark

Add Shot Mark

button

Mark List

button (0 27)

mark will appear over the