Da-Lite HORIZON ELECTROL Manuel d'instruction - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Da-Lite HORIZON ELECTROL. Da-Lite HORIZON ELECTROL 8 pages.
Également pour Da-Lite HORIZON ELECTROL : Manuel d'instruction (8 pages)

Imprimer la page

Screen Operation

The Horizon has been preset to three or four different formats. The screen can be set to any format by pressing the corresponding
button on the keypad. Below is a list of each button function.
IMPORTANT! When operating the switch, press and release buttons. Do not hold the button for more than
three (3) seconds or the button will be reprogrammed to the current screen position.
Native NTSC (1.33:1) Format Screens
1.
Lowers screen to NTSC (1.33:1) format. Mast will travel down and
reverse wrap on the roller. The mask it not used for this format.
2. Sets format to HDTV (1.78:1).
3. Sets format to Letterbox (1.85:1).
4. Sets format to Cinemascope (2.35:1).
Stop – Stops the screen and mask movement at any position when pressed.
Up – Returns the screen and mask to the up position.
Screen – Runs the screen up and down without mask movement.
Mask – Runs the mask up and down without screen movement.
Format Selection
1
2
3
4
Screen
Mask
Up
Stop
Wall Keypad
Transmitter
Native HDTV (1.78:1) Format Screens
1.
Lowers screen to HDTV (1.78:1) format. Mast will travel down and
reverse wrap on the roller. The mask it not used for this format.
2. Sets format to Letterbox (1.85:1).
3. Sets format to Cinemascope (2.35:1).
4. Open: User defined preset.
Format Selection
1
2
Screen
Up
Dual IR/RF
Remote
3
4
Mask
Stop
3