Da-Lite IDEA Panoramic Manuel d'instruction - Page 9

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Da-Lite IDEA Panoramic. Da-Lite IDEA Panoramic 12 pages.
Également pour Da-Lite IDEA Panoramic : Manuel d'instruction (12 pages), Manuel d'instruction (8 pages)

Imprimer la page

Wall Mounting for Panoramics with Full Length Marker Tray (continued)

Steps 3-8 require at least four people. Place one person on the

far left end of the screen, one person at the left panel seam,

one person at the right panel seam and one person on the far

right end of the screen. More people can be utilized as

needed. When lifting the screen off of the clean work area to

the wall and then onto the wall, it is crucial that the screen

remain coplanar and does not bend at the seams.

CAUTION: Any bend between the three panels at the seams

may damage the screen or result in a permanent gap

between the seams.

Aluminum Tray

#8 X 1/2" Screws

Figure 8

3. Using all four people, carefully lift the fully assembled three panel

screen to an upright position and then place back on the clean

work area with the viewing surface of each panel facing up.

4. Align the center panel tray section with the center panel ensuring

the tray edges align with the panel seams.

5. Secure the center panel tray section to the center panel with the

provided #8 x 1/2" screws (Figure 8).

6. Repeat Steps 4-5 to attach the left and right tray sections to the

left and right panels.

NOTE: Straight and even alignment of the tray sections will

maintain rigidity of the screen assembly when installed on the

wall.

Viewing Surface