Da-Lite Cosmopolitan Electrol Manuel d'instruction - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Da-Lite Cosmopolitan Electrol. Da-Lite Cosmopolitan Electrol 16 pages. For sizes up to 9'x12'
Également pour Da-Lite Cosmopolitan Electrol : Manuel d'instruction (8 pages), Manuel d'instruction (8 pages), Manuel d'instruction (8 pages), Manuel d'instruction (6 pages), Manuel d'instruction (6 pages), Manuel d'instruction (8 pages)

Installation Continued

NOTE: Under no circumstances should unit be completely sealed in

recessed installation. Allow access for service. Picture surface

is centered in case. Case extends 4" beyond surface on either end.

Do not attach anything to screen slat rod or bottom fabric pocket.

1. Make sure screen is level. Use a carpenter's level and plumb

level.

2. Remove tape and rubber bands from slat pocket.

CAUTION! Do not cut wrapping paper or tape with knife or

any sharp tool. Remove by hand.

ATTENTION! Ne coupez pas le papier d'emballage ou le

ruban adhésif avec un couteau ou un outil tranchant. Retirez

à la main.

3. Install electrical hook up that applies to your unit. Make sure to

review your Electrical Installation Checklists and wiring diagrams

(included) for either 120 volt switch, 220/240 volt switch, or low

voltage control.

4. Test installation by running screen up and down a few times.

Be prepared to stop screen. Standard Duty Cycle:

1 MIN. ON / 3 MIN. OFF.

NOTE: Must be installed in accordance with the requirements of the

Local Building Codes, the Canadian Electrical Code (CEC), CAN/CSA

C22.1 and the National Electric Code (NEC), NFPA 70.

NOTE: DO NOT clean end caps with any cleaning solution. Use only

damp cloth to clean dust from screen case.