Da-Lite Multi Format Imager Manuel d'instruction - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction pour {nom_de_la_catégorie} Da-Lite Multi Format Imager. Da-Lite Multi Format Imager 20 pages.
Également pour Da-Lite Multi Format Imager : Manuel d'instruction (12 pages)

Imprimer la page

Multi Format Imager Assembly

9. Assemble top right and bottom right corner assembly by inserting (3) #10 x .375" long button head screws through bottom of frame

into the corner L connector bracket. Tighten two set screws on flat "L" bracket to line up the front faces as shown in Figure 12.

Figure 12

Tighten Set Screws

Until Front Surfaces

Are Flush

10. Route the two cable assemblies around motor bracket and plug the 3 wire male connector into the 3 wire female connector

on the motor bracket. The motor will have a gray data cable with an RJ-45 connector on the end coming out of the head of the

motor. Plug this end into the RJ-45 coupler. Tuck the RJ-45 coupler underneath motor bracket securely to prevent entanglement

as shown in Figure 13.

Wire Underneath

Fasten Screws

Through Top Frame

Assembly Into

Connecting Bracket

Plug Motor

Power In

Route Power

Cable Behind

Motor Bracket

Tuck Excess

Motor Bracket

Tighten Set Screws

Until Front Surfaces

Are Flush

Fasten Screws

Through Bottom Frame

Assembly Into

Connecting Bracket

Figure 13

Tuck RJ-45 Coupler

Underneath Motor

Bracket

Data Cable

From Motor Head