eKey Home Manuel d'utilisation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} eKey Home. eKey Home 17 pages.
Également pour eKey Home : Manuel d'utilisation (20 pages)

Imprimer la page
Step
Action
4.
5.
No action
required.
6.
7.
No action
required.
All user fingers were deleted. The system is in normal mode.
You can reset the system to its default settings either via the finger
scanner or using the control panel. Use whichever device is most easily
accessible.
Via the finger scanner
The finger scanner will be reset to its default settings. All user and
administrator fingers will be irrecoverably deleted.
The system is in normal mode.
Step
Action
1.
2.
3.
4.
Description
Draw the same
administrator finger over
the sensor as in step 1.
-
Draw any user finger over
the sensor in order to
verify. No finger should
now be able to gain
access.
-
Description
Draw any administrator
finger over the sensor.
The administrator finger
was not recognised.
Repeat step 1.
Wait for 5 seconds.
Carry out a 'finger touch'
on the sensor.
Draw a different
administrator finger over
the sensor than was used
Display
right green.
Status LED
flashes red, the
function LEDs
flash green.
Status LED lights
up blue.
Status LED lights
up red.
Status LED lights
up blue.
Display
Status LED lights
up blue, the
function LEDs
flash green.
Status LED lights
up red.
-
-
Status LED lights
up blue, the
function LEDs
flash red/green.
Status LED lights
up blue, the
function LEDs
flash left red,
right green.
Status LED
flashes green,
the function
LEDs flash red.
Resetting the
system to
default
settings
en│13