eKey Uno Manuel de démarrage rapide - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} eKey Uno. eKey Uno 6 pages. Fingerprint scanner, wireless
Également pour eKey Uno : Manuel de démarrage rapide (12 pages), Manuel de démarrage rapide (6 pages)
Imprimer la page
Activate the eqiva BLUETOOTH® Smart Lock
1
Follow the operating instructions of the eqiva BLUETOOTH® Smart
Lock
2
Define the position for the ekey uno
Determine a suitable position outside for your ekey uno before you start
mounting it. Right next to the door, for example.
It is IMPORTANT to note:
110 cm
*According to the BLE wireless connection standard, the typical range is 10 m. However, this can be
lower, depending on the installation situation and the type of door.
3
Pull cable through mounting plate
Attach the mounting plate - minimum height 110 cm
4
Glue variant*
An adhesive foil is already
attached to the mounting
plate. Remove the base foil
and adhere the mounting
Mains-powered variant
The device must be easy to reach with one's hand.
The installation height of at least 110 cm is
important for ergonomically correct operation and
must therefore be observed.
The ekey uno communicates wirelessly with the
door lock actuator. Both devices must therefore be
installed in close proximity* to one another.
OR
plate.
The fingerprint scanner can be powered
via the wall power supply unit (220 VAC)
provided or via the power line of your door
station (12 VDC-24 VDC).
Screw variant