American Standard Cadenza Elite 6060E Caractéristiques et dimensions - Page 2
Parcourez en ligne ou téléchargez le pdf Caractéristiques et dimensions pour {nom_de_la_catégorie} American Standard Cadenza Elite 6060E. American Standard Cadenza Elite 6060E 2 pages. Corner whirlpool
Également pour American Standard Cadenza Elite 6060E : Liste des pièces (1 pages)
Imprimer la page
975mm
(38-3/8)
OUTLINE OF
CUTOUT
1661mm
(65-3/8)
178mm x 381mm
(7 x 15) CUTOUT
346mm
(13-5/8)
143mm
254mm
C/L OF
(5-5/8)
(10)
DRAIN
C/L OF OVERFLOW
89mm
(3-1/2)
E-Z INSTALL WHIRLPOOL
HEATER
83mm
(3-1/4)
38mm
(1-1/2)
1-1/2 N.P.T. THREAD
1-1/2 O.D. TAILPIECE
GENERAL SPECIFICATIONS FOR 6060E WHIRLPOOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
PUMP
E-Z INSTALL WHIRLPOOL HEATER
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR
PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY INTEGRAL FEET. NO ADDITIONAL
SUPPORT REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL
INFORMATION.
OPTIONAL 2-WALL TILING BEAD KIT No.TILE-BEAD MUST BE ORDERED SEPARATELY.
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
FITTINGS NOT INCLUDED, MUST BE ORDERED SEPARATELY.
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR
IN TE R F ER E N C E W IT H C IR C U LAT IN G SYST EM PI PING , D RAIN OVER F LO W , AND APRO N
INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances
established by ANSI Standard Z124.1
These measurements are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided leaflet.
CADENZA ELITE™ CORNER
WHIRLPOOLS BY AMERICAN STANDARD
1949mm
(76-3/4 REF.)
C/L
SEAT AREA
PUMP
114mm
(4-1/2)
INTEGRAL FEET
SUPPORT
ROUGH FLOOR
76-3/4 x 65-3/8 x 21-1/2 In. (1949 x 1661 x 546mm)
45 x 40 In. (1143 x 1016mm)
49 x 43 In. (1245 x 1092mm)
24 Lbs./Sq.Ft. (114 Kgs./Sq.m)
WHIRLPOOL ELECTRICAL SPECIFICATIONS
2.1 HP, 14.4 AMPS,120V.
© 2003 American Standard Inc.
HIGH GLOSS ACRYLIC
ON/OFF SWITCH
RECOMMENDED FITTING
LOCATION 64 X 381mm (2-1/2 X 15)
LEVELING STRINGER
NOT FOR SUPPORT
495mm
(19-1/2)
51mm
(2)
546mm
(21-1/2)
105 Lbs. (48 Kg.)
822 Lbs. (370 Kg.)
86 Gal. (326 L)
71 Gal. (269 L)
15-3/8 In. (391mm)
41.7
68.4
12.0 AMPS,120V.