American Standard CADENZA ELITE 6060E SERIES Manuel d'instructions d'installation

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} American Standard CADENZA ELITE 6060E SERIES. American Standard CADENZA ELITE 6060E SERIES 6 pages. Whirlpool

Imprimer la page

CADENZA ELITE™

HIGH GLOSS ACRYLIC

SHOWN LESS ALL FITTINGS

975mm

(38-3/8)

OUTLINE OF

CUTOUT

1661mm

(65-3/8)

178mm x 381mm

(7 x 15) CUTOUT

346mm

(13-5/8)

143mm

254mm

C/L OF

(5-5/8)

(10)

DRAIN

114mm

(4-1/2)

C/L OF OVERFLOW

89mm

(3-1/2)

E-Z INSTALL WHIRLPOOL

HEATER

83mm

(3-1/4)

38mm

(1-1/2)

1-1/2 N.P.T. THREAD

1-1/2 O.D. TAILPIECE

GENERAL SPECIFICATIONS FOR 6060E WHIRLPOOL

INSTALLED SIZE

76-3/4 x 65-3/8 x 21-1/2 In. (1949 x 1661 x 546mm)

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

WHIRLPOOL ELECTRICAL SPECIFICATIONS

PUMP

E-Z INSTALL WHIRLPOOL HEATER

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor

immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before

enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect

the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump,

motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and

enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead

(required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS.

752864-100 Rev. C

6060E SERIES

WHIRLPOOL

INSTALLATION INSTRUCTIONS

1949mm

(76-3/4 REF.)

C/L

SEAT AREA

PUMP

ON/OFF SWITCH

RECOMMENDED FITTING

LOCATION 64 X 381mm (2-1/2 X 15)

495mm

(19-1/2)

51mm

(2)

546mm

(21-1/2)

INTEGRAL FEET

SUPPORT

ROUGH FLOOR

105 Lbs. (48 Kg.)

822 Lbs. (370 Kg.)

86 Gal. (326 L)

71 Gal. (269 L)

45 x 40 In. (1143 x 1016mm)

49 x 43 In. (1245 x 1092mm)

15-3/8 In. (391mm)

24 Lbs./Sq.Ft. (114 Kgs./Sq.m)

2.1 HP, 14.4 AMPS,120V.

12.0 AMPS,120V.

THANK YOU...

for selecting an American Standard bath. Your new

bath is shipped to you after careful inspection. The

whirlpool version is completely assembled with pump,

motor, and system piping. All you need to finish the

installation are your selected fittings and electrical

connections for a whirlpool.

To insure maximum performance and pleasure from

this product, please follow the instructions and

cautions.

List of Optional Components (not included):

• Flex-Jet Pulse Jet Kit*

• Flex-Jet Soft Jet Kit*

• Apron Kit*

LEVELING STRINGER

NOT FOR SUPPORT

• Tile Bead Kit*

List of Required Components (not included):

• Drain*

* see your Home Depot Retailer

List of Required Tools and Supplies:

Tools

• Level

• Tape Measure

• Pipe Wrench

• Slip Joint Pliers

• Screw Driver

• Standard

Woodworking Tools

• Personal Safety

41.7

Equipment

68.4

• Caulking Gun

• Bath Filler*

Supplies

• Nails

• Putty

• Caulking (waterproof)

• 1 x 3 or 2 x 2

Stringers

• Drop Cloth

• 15 amp GFI & 20 amp

GFI Outlet

• Cement, Plaster,

Grout

All product names listed herein are trademarks

of American Standard Inc. unless otherwise noted.