Daan Tech BOEM Manuel de démarrage rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Daan Tech BOEM. Daan Tech BOEM 14 pages.
2 options for evacutaing the waste water
1
Siphon drain pipe
Connect the water outlet hose to a siphon drain pipe (usually accessible
under the sink)
Warning: The waste water coming out of Bob can reach high
temperature of up to 70°C.
2
Install the water outlet drain hose either in a fixed or flexible mode by using the
equipment provided.
Fixed installation
Place the drain hose directly
in your sink and fix it with
the equipment provided.
Flexible installation
Place the drain hose in a
container (jerrican, bucket,
etc...)
To avoid possible flooding, the container shall have a capacity of at least 5L.
2.3 | Power plug
WARNING: Please turn the power supply off before installing Bob.
Connect the power cable to Bob's back.
4
Before you connect Bob to the power supply, please make sure that the voltage on the
type plate corresponds to the voltage of your power supply.
The appliance must be placed on an even and stable surface. Daan Tech is not liable for
any damage caused by placing the device on an uneven and/or unstable surface during use.
Do not plug or unplug by pulling the cord, but always
pull the plug directly.
3 | G
ettinG Started
2 Options of water supply mode :
Use the water inlet pipe. The water tank is automatically filled before each cycle,
so there is no need to fill it manually. It is the preferred choice if you use Bob as a built-
in dishwasher or if you have close access to a water supply.
Use the built-in water tank: convenient, because it makes Bob completely
autonomous to use wherever you are. Fill the built-in water tank with Carafe. This is
the preferred choice if you intend to regularly move Bob around or if you do not have
access to a water inlet.
4 | C
apaCitive door openinG
When you touch the door, it automatically opens.
The capacitive area is here
To avoid problems, the capacitive door opening is
deactivated for 3 seconds after closing the door.
When Bob is disconnected from the power supply
you can still open the door but you will encounter
greater resistance due to the deactivation of the
door's capacitive opening system.
Convenient, because you can open the door
of your Bob with your elbow, for instance, if
your hands are dirty!
5