Ekinex EK-FE1-TP Manuel de démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Ekinex EK-FE1-TP. Ekinex EK-FE1-TP 4 pages. Binary output 8-fold / blind actuator 4-fold

Imprimer la page

Dimensions [mm]

EK-FE1-TP

8xD.O. 16(10)A/230Vac

50/60 Hz

4xBlind 16(10)A/230Vac

50/60 Hz

230V~ 50/60Hz

bus KNX

Marks

• KNX

• CE: the device complies with the Low Voltage Directi-

ve (2014/35/UE) and the Electromagnetic Compatibili-

ty Directive (2014/30/UE). Tests carried out according

to EN 50491-2:2010, EN 50491-3:2009, EN 50491-4-

1:2012, EN 50491-5-1:2010, EN 50491-5-2:2010, EN

50428:2005 +A1:2007 + A2:2009

Maintenance

The device is maintenance-free. To clean use a dry cloth.

It must be avoided the use of solvents or other aggressive

substances.

Disposal

At the end of its useful life the product

described in this datasheet is classified

as waste from electronic equipment in

accordance with the European Direc-

tive 2012/19/UE (WEEE recast), and

cannot be disposed together with the

municipal undifferentiated solid waste.

Warning! Incorrect disposal of this product may

cause serious damage to the environment and hu-

man health. Please be informed about the correct

disposal procedures for waste collecting and pro-

cessing provided by local authorities.

Warnings

• Installation, electrical connection, configuration and

commissioning of the device can only be carried out

by qualified personnel in compliance with the appli-

cable technical standards and laws of the respective

countries

• The use of the device in security applications is not

allowed.The device may however be used for auxiliary

signaling functions

• Opening the housing of the device causes the imme-

diate end of the warranty period

• In case of tampering, the compliance with the essen-

tial requirements of the applicable directives, for which

the device has been certified, is no longer guaranteed

• ekinex

KNX defective devices must be returned to the

manufacturer at the following address: EKINEX S.p.A.

Via Novara 37 I-28010 Vaprio d'Agogna (NO) Italy

Other information

• This datasheet is aimed at installers, system integra-

tors and planners

• For further information on the product, please contact

the ekinex

technical support at the e-mail address:

[email protected] or visit the website www.ekinex.

com

• Each ekinex

device has a unique serial number on

the label. The serial number can be used by installers

or system integrators for documentation purposes and

has to be added in each communication addressed to

the EKINEX technical support in case of malfunctio-

ning of the device

• KNX

and ETS

are registered trademarks of KNX

Association cvba, Brussels

documentation without notice.