Ekinex EK-EH2-TP-RW Manuel de démarrage rapide - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Ekinex EK-EH2-TP-RW. Ekinex EK-EH2-TP-RW 4 pages. 6-fold knx pushbutton
Imprimer la page
126
Rectangular frame of
the form series
(EK-FOR-...)
135
Rectangular frame of
the flank series
(EK-FLR-...)
Marks
• KNX
• CE: the device complies with the Low Voltage Directi-
ve (2006/95/EC) and the Electromagnetic Compatibility
Directive (2004/108/EC). Tests carried out according to
EN 50491-5-1:2010, EN 50491-5-2:2010
Maintenance
The device is maintenance-free. To clean use a dry cloth.
It must be avoided the use of solvents or other aggressive
substances.
Disposal
At the end of its useful life the product
described in this datasheet is classified
as waste from electronic equipment in
accordance with the European Direc-
tive 2002/96/EC (WEEE), and cannot
be disposed together with the munici-
pal undifferentiated solid waste.
!
Warning! Incorrect disposal of this product may
cause serious damage to the environment and hu-
man health. Please be informed about the correct
disposal procedures for waste collecting and pro-
cessing provided by local authorities.
Documentation
This datasheet refers to the release A1.0 of the ekinex
device EK-EH2-TP, and is available for download at www.
ekinex.com as a PDF (Portable Data Format) file.
File name
Device release
STEKEH2TP_EN.pdf
8
Updating
A1.0
02/2021
Warnings
• Installation, electrical connection, configuration and
commissioning of the device can only be carried out by
qualified personnel in compliance with the applicable
technical standards and laws of the respective countri-
es
• Opening the housing of the device causes the imme-
diate end of the warranty period
• In case of tampering, the compliance with the essential
requirements of the applicable directives, for which the
device has been certified, is no longer guaranteed
• ekinex
KNX defective devices must be returned to the
®
manufacturer at the following address: EKINEX S.p.A.
Via Novara 37, I-28010 Vaprio d'Agogna (NO) Italy
8
Other information
• This datasheet is aimed at installers, system integra-
tors and planners
• For further information on the product, please contact
the ekinex
®
[email protected] or visit the website www.ekinex.
com
• Each ekinex
®
the label. The serial number can be used by installers
or system integrators for documentation purposes and
has to be added in each communication addressed to
the EKINEX technical support in case of malfunctioning
of the device
• KNX
and ETS
®
sociation cvba, Brussels
© EKINEX S.p.A. The company reserves the right to make changes to this
documentation without notice.
®
4
technical support at the e-mail address:
device has a unique serial number on
are registered trademarks of KNX As-
®