Ekinex EK-GD2-DL-2-LV Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Ekinex EK-GD2-DL-2-LV. Ekinex EK-GD2-DL-2-LV 6 pages. Dali 2 standard dimmers at 12 / 48 vdc with 1 / 2 - channels

Imprimer la page

Dimensions

Marks

• CE: the device complies with the Electromagnetic

Compatibility Directive (2014/30/EU), the Low Volta-

ge Directive (2014/35/EU) and the RoHS III Directive

(2011/65/EU).

• Reference Standards: EN 61347-1:2015, EN 61347-

2-13, EN 55015:2013+A1:2015, EN 61547:2009, EN

50581:2012, IEC/EN 62386-101/102/207, IEC/EN

60929-E.2.1.

References

• IEC/EN 62386-101 - Digital addressable lighting inter-

face, General requirements - System

• IEC/EN 62386-102 Digital addressable lighting interfa-

ce, General requirements - Control gear

• IEC/EN 62386-207 Digital addressable lighting interfa-

ce, Particular requirements for control gear – LED mo-

dules (device type 6).

• IEC 60929-E.2.1 Control interface for controllable bal-

lasts - control by DC voltage - functional specification

Maintenance

The device is maintenance-free. To clean use a dry cloth.

It must be avoided the use of solvents or other aggressive

substances.

Disposal

At the end of its useful life the product

described in this datasheet is classified

as waste from electronic equipment in

accordance with the European Direc-

tive 2012/19/EU (WEEE recast), and

cannot be disposed together with the

municipal undifferentiated solid waste.

Warning! Incorrect disposal of this product may

cause serious damage to the environment and hu-

man health. Please be informed about the correct

disposal procedures for waste collecting and pro-

cessing provided by local authorities.

Warnings

• Installation, electrical connection, configuration and

commissioning of the device can only be carried out by

qualified personnel in compliance with the applicable

technical standards and laws of the respective countri-

• Opening the housing of the device causes the imme-

diate end of the warranty period

• In case of tampering, the compliance with the essential

requirements of the applicable directives, for which the

device has been certified, is no longer guaranteed

• ekinex

defective devices must be returned to the ma-

nufacturer at the following address: Ekinex S.p.A. Via

Novara 35, I-28010 Vaprio d'Agogna (NO) Italy

Other information

• The instruction sheet must be delivered to the end cu-

stomer with the project documentation

• For further information on the product, please contact

the ekinex

technical support at the e-mail address:

[email protected] or visit the website www.ekinex.

com

• Each ekinex

device has a unique serial number on

the label. The serial number can be used by installers

or system integrators for documentation purposes and

has to be added in each communication addressed to

the EKINEX technical support in case of malfunctioning

of the device

• DALI, DALI2 and their logos are registered trademarks

of the Digital Illumination Interface Alliance (DiiA).

documentation without notice.